Klarstein TOMAHAWK Manual De Instrucciones página 36

EN
36
Cleaning the burner unit
Turn off the gas on the control knob and disconnect the gas cylinder.
Remove cooling grid.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a
cloth.
Clean out clogged connectors with a pipe cleaner or stiff wire (e.g.
opened paper clip).
Check the burner for damage (cracks or holes). If damage is found, replace with a new
burner. Reinstall the burner, making sure the gas valve orifices are properly positioned
and secured in the burner inlet (venturi).
Top
Storage
• The gas cylinder must be stored outside in a well-ventilated place and disconnected
from the gas grill when not in use.
• Make sure that you disconnect the connection between the gas cylinder and the
grill outdoors and that there are no sources of ignition nearby.
• After a long period of storage, check the gas barbecue for gas leaks and
blockages in the burner openings before using it again.
• Follow the cleaning instructions to ensure that the barbecue is safe to use.
• Check all areas under the cover for insects and for blockages caused by insects
if the barbecue has been stored outside. If blockages are present, remove them
before use.