Operating Instructions BACS125 / BACS126
63 83 066 D3275.201.08.03.02
3.
Insert the ultrasonic tip [→ 23].
4.
Check the ultrasonic tip for usability.
5.
Set a sufficient amount of cooling water (> 30 ml/min) [→ 25].
6.
Use filtered water only (< 50 µ m).
7.
Check the nozzles for blockages and lime deposits, for
example, and clean the nozzles if necessary.
8.
Make sure the ultrasonic tip is fits tightly.
9.
Perform an axial load test of the ultrasonic tip.
Tip: Use a cofferdam in patients for endodontic work.
4 Pre-reprocessing
19