B.A. International BACS125 Manual Del Operador página 25

Operating Instructions BACS125 / BACS126
63 83 066 D3275.201.08.03.02
5.3 Inserting and removing the ultrasonic tip
Inserting the ultrasonic tip
ü The ultrasonic handpiece is not in operation.
1. Insert the ultrasonic tip into the torque wrench (A).
2. Slowly screw the ultrasonic tip into the torque wrench
counterclockwise. Turn a quarter revolution past the
resistance.
3. Detach the torque wrench.
4. Check the ultrasonic tip.
CAUTION! A loose ultrasonic tip can come loose from the thread
or break off. This may cause injury! Use the ultrasonic handpiece
only if the ultrasonic tip is firmly clamped in place.
5 Operation
23