1. CALORIES:
Estimated value of calories burned so far during the training session. The actual value depends on
a variety of different factors. A clinically accurate indication is, therefore, not possible with this training
device. The display range is from 0 to 999 kcal.
2. TIME:
Time elapsed so far during your training session; shown as [minutes:seconds] or as [hours.minutes].
The display range is from 0:00 to 99.59.
3. PULSE:
Your current heart rate in beats per minute (BPM). It is measured by the grip sensors on the sensor
bracket or by a pulse belt connected via bluetooth. Please be aware here too, it is not possible to
provide clinically precise information. The display range is from 30 to 220 BPM.
4. DISTANCE:
Distance in kilometers that you've covered so far during your training session. The display range is
from 0.00 to 99.99 km.
5. RPM / SPEED:
In this segment, the display alternates every 5 seconds between the current pedal revolutions per
minute (RPM) and the current speed in km/h (SPEED). The display range is 0 to 999 RPM and 0.0
to 99.9 km/h.
6. WATT / LEVEL:
In this segment, the display alternates every 5 seconds between the power in watts (WATT) you
currently produce and the current intensity level (LEVEL). The display range is 0 to 726 watts and
Level 1 to 24.
7. DOT GRAPHIC FOR INTENSITY LEVELS:
Dot columns indicate the current and the upcoming intensity levels. The flashing dots show
the current level. The steady dots to the right of the flashing ones show the next levels. Each
dot represents 3 intensity levels. (Example: The intensity levels 6 to 8 are represented by 2
vertical dots, the levels 9 to 11 by 3 dots etc.). Maximum column height is 8 dots.
Each column represents one minute training time; a maximum of 20 minutes is shown.
• After 5 minutes of inactivity, the display will turn off and go black. To reactivate it, press one of the
function keys, for example, the Start/Pause button.
46