SPORTSTECH CX700 Manual De Usuario página 50

The device is Bluetooth compatible and has a USB socket. Users have different options:
1. Pulse measuring via Bluetooth device:
Measure your pulse using a Bluetooth-compatible sensor (pulse strap). To do this, start your workout
and switch on the corresponding heart rate monitor. The system automatically recognizes the device
and shows the measured data on the display.
2. Use of a fitness app (Kinomap):
In addition to a device for pulse measuring, you have the option of connecting another Bluetooth-
enabled device (e.g. smartphone, tablet, television) to use the Kinomap app. To do this, activate the
Bluetooth connection and select the Kinomap app to connect to your training device while it is in
stand-by mode. Follow the instructions and you can start your training!
3. USB charging function:
You can use the integrated USB port on the right edge of the display to charge your smart device.
Simply plug in the data cable and the display will automatically supply power. This is only possible
during operation. No charging takes place in stand-by mode or when the device is switched off.
ATTENTION
For cleaning, maintenance and / or repair work, the power supply must be completely disconnected from
the wall socket.
CLEANING
Remove sweat from your training device after each training session. Do this carefully with a softly wetted
cloth and mild soap. Do not use solvents. Regular cleaning significantly enhances the lifetime of your
training device. However, DO NOT use any liquids near the power suply, the computer/display or any other
electric or electronic devices.
Damage caused by perspiration or other liquids, are not covered at any time by the warranty.
Also during training, prevent liquids (like drinks) to enter the training device or the computer.
MAINTENANCE
The training device is equipped with sealed bearings. Lubrication is not required.
CHECKING THE FIXING MATERIAL
Before each training session, check the tightness of bolts and nuts. Re-tighten, if necessary.
CHECKING THE COMPONENTS
Before each training session, check the safe condition of saddle, seat post, handlebars and pedals.
CAUTION: Never start or continue a training when components are loose or even damaged.
BLUETOOTH & USB CONNECTION
CARE, CLEANING & MAINTENANCE
50