Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FOREWORD
The contents of this manual are generic and not all the functions described may be available on your
product.
The manufacturer declines all responsibility for possible inaccuracies contained in this pamphlet, due to printing or
copy errors. We reserve the right to make on our own products those changes to be considered necessary or use-
ful, without jeopardizing the essential characteristics. Read the instructions for use very carefully paying particular
attention to the rules concerning safety devices. This appliance must only be used for what it has been designed
for and built for and that is: all baking of dishes and regenerating pre-cooked and/or frozen food.
INSTRUCTIONS FOR USE AND MAINTENANCE
• indicate that this appliance is only for professional use and that it shall be used by qualified people;
• note that those parts which have been protected by the manufacturer or his agent shall not be adjusted by the
user.
WARNING!
Before making any type of connection of this equipment (electrical or hydraulic), carefully read the instructions in
this manual. This manual must be carefully kept to be available for future reference by users or service technicians.
Installation must be carried out by d qualified personnel only.
1.0 DECLARATION OF CONFORMITY
The Manufacturer declares that the appliances conform to the EEC norms.
They must be installed in accordance with current standards, especially regarding aeration of the premises and the
exhaust gas evacuation system.
Note: The Manufacturer declines all and every responsibility for any direct damages caused by: an in-
correct use, wrong installation or bad maintenance.
1.1 EUROPEAN DIRECTIVE ROHS 2012/19/UE
This appliance is marked according to the European directive 2012/19/UE on Waste Electrical and Electronic Equip-
ment (WEEE). By ensuring this product is disposed correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
The symbol on the product, or on the documents accompanying the product, indicates that this
appliance may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste dis-
posal.
1.3 TRANSPORT OF THE OVEN AND PACKAGING REMOVAL
Upon receipt of the oven and before installing it, check the packaging is intact and there are not visible damages.
Also check that along with the oven you receive also the documentation, consisting of:
•
Instructions for installation, use and maintenance
•
Wiring diagram
•
Label ISO 3864-1
Before bringing the oven to the point, where it must be installed, check the following:
The doors are large enough to allow passage of the oven
The floor supports the weight.
According to the model of oven, its dimensions and its weight, use suitable facilities to handle goods during trans-
port and installation, able to guarantee stability in order to avoid overturning, falls or uncontrolled movements of
the appliance or its components.
Keep the oven packed until you reach the site where the oven is going to be installed.
The packaging makes the handling of goods easier and protects the oven from accidental push.
During moving and installation of the oven, the installer must comply with accident-prevention regulations in force
at the place of installation (use of safety shoes, gloves, etc.) Remove the packaging taking care not to damage
the oven. The adhesive film, that protects the surfaces made of stainless steel can be removed also after you have
positioned the oven on the corresponding stand or the support surface.
ATTENTION: Packaging materials and adhesive film are potentially dangerous.
For this reason, they must be kept out of the reach of children and properly disposed of in com-
pliance with local directives.
You should separate packaging materials (wood, cardboard, plastic...) and dispose of them sep-
arately, in compliance with directives in force at installation site.
Note: Take the protective film off the stainless steel parts by hand before starting the appliance.
Do not use abrasive substances and/or metal objects. Clear any adhesive residues using a sponge soaked in sol-
vent. If the oven is heated up before removing the adhesive film, the removal of the film and cleaning of residues
of glue will be much more difficult.
10
Publicidad
