Hella Gutmann
3. Safety Precautions
3.1. General Safety Precautions
• The Radar Kit III is exclusively intended for use on a vehicle. It is a precondition for the use of the Radar Kit III that the
user has automotive engineering skills and is therefore aware of the sources of danger and risks in the workshop and
on the vehicle.
• Please read the entire operating instructions carefully before using the device.
• All notes given in the individual sections of the operating instructions apply. It is important to regard the following
measures and safety precautions.
• Furthermore, pay attention to all general instructions from labour inspectorates, trade associations and vehicle man-
ufacturers as well as all laws, legal ordinances and instructions which have to be commonly obeyed by a repair shop.
3.2. Safety Precautions – Risk of Injury
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the vehicle. Therefore regard the
following:
• Protect vehicle against rolling away.
• Basically place the gear selector lever of AT vehicles to park position.
• Deactivate the start/stop system to avoid an inadvertent engine startup.
• Connect the device to the vehicle only when engine is shut down.
• Do not reach into rotating parts while the engine is running.
• Do not run cables near rotating parts.
• Check the high-voltage parts for damage.
CSC-Kit Radar III
Safety Precautions | 3.
27