Hella Gutmann CSC-Kit Radar III Manual De Instrucciones página 40

5. | Working with the Radar Kit III
4. Adjust the radar reflector CSC 4-04 / CSC 4-05 / CSC 4-07 to the height indicated in the diagnostic device.
5. Align the laser point centered to the radar sensor by turning the base rod.
NOTICE
Regard the manufacturer-specific reference marks.
NOTICE
Pay attention not to change the height of the radar reflector when turning the rod.
The calibration can be influenced by metal objects. Remove the base support and the positioning aid before
you can start the calibration.
6. Remove the base support and the positioning aid.
7. Start the calibration in the diagnostic device with
40
.
Hella Gutmann
CSC-Kit Radar III