Publicidad
to fall out during the use of the steam mop.
Note: Move the steam mop in a continuous motion until you are
finished. DO NOT leave the mop in a stationary
Maintenance & Care
1. Unplug power cord form
2. Carefully remove the mop pad from the mop head. The mop pad
and lower assembly may be
3. Any water remaining in the water tank should be emptied prior to
machine
storage.
4. Mop pad can be machine washed in warm water. Use only liquid
detergents. Do not use fabric softeners or bleach for best results, air
dry.
5. Wrap power cord around hook on back of the steam
6. Wipe all surfaces of the steam mop with a soft cloth. Store upright in
a protected, dry area.
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch off and
disconnect the plug form electrical outlet before performing
maintenance or troubleshooting checks.
Problem
Reduced steam or
no steam
Note:
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
outlet.
hot.
Possible
Water tank empty
Steam level not se-
lected
position.
Remedies
Fill tank
Select steam level by pushing
steam level button
mop.
Publicidad
