SMA SUNNY TRIPOWER 60-10 Instrucciones página 14

5 Disconnecting the Inverter from Voltage Sources
9. Remove the display cable from the display. To do
this, remove the 2 screws from the cable holder
(TX20), remove the two screws from the plug (cross-
head screwdriver) and pull off the plug.
10. Remove the M12x35 screw with the sealing washer
(TX55 or AF 8) and take off the enclosure lid.
11. Remove the 8 screws of the intermediate frame and
take off the intermediate frame (TX25).
14 STP60-PSU-RM-xx-10
SMA Solar Technology AG
1
2
1
8x 8x 8x
Replacement Manual
2