SMA SUNNY TRIPOWER 60-10 Instrucciones página 23

SMA Solar Technology AG
5. Align the new assembly and carefully insert it into
the inverter. Pay attention to the touchable areas.
6. Ensure that all PCB brackets are correctly locked in place
7. Tighten the fastening screws (TX20, torque: 2 Nm).
8. Reconnect all cables. The plugs must engage
audibly.
9. Slide the fan into the bracket and tighten the 2
screws (TX20, torque: 2 Nm).
Replacement Manual
7 Installing the PSU Assembly
STP60-PSU-RM-xx-10 23