Burley Coho XC Manual De Instrucciones página 11

Adjusting the Kickstand
the kickstand stop allows the coho Xc to support various
wheel diameters. the stop has 3 settings marked 1, 2, 3.
out of the box the kickstand is set to the 1 setting (Low
setting is 1, medium setting is 2, high setting is 3)
If the kickstand height needs to be adjusted, perform the following steps:
1 2 3
Loosen the nuts holding the kickstand stops
rotate the kickstand stop until the desired number is deploy the kickstand to align the stop
in place using 2 x 10mm wrenches.
positioned right side up. Here, it is set to the low setting. into the correct location.
tighten the nuts while the kickstand is deployed.
note
Both stops are linked and will rotate together.
note
Kickstand stability can vary with trailer load.
11
ASSEMBLY & uSE
coHo Xc ENG DEU FRA ESP