Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Fender
1
Insert fender frame into receiving
tubes on the rear of the frame,
positioning the fender so it extends
toward the rear of the trailer body.
Yoke Installation
1
Insert yoke into the slotted brackets
at the front end of the trailer body.
10
ASSEMBLY & uSE
2
use the tethered retaining clips on the
trailer body to secure the fender by
inserting the pins into both frame tubes
and through the fender assembly.
2
Insert the quick release skewer into top
bracket hole, passing through the yoke.
ENG
DEU
note
do not overload the Fender. (See "Before
You ride" section for loading instructions)
3
close retaining clip on pin to secure lock
pin and Fender assembly in position.
3
Screw on quick release skewer
adjustment nut, making sure there is a
spring on either side of the mounting
brackets, and thread on until the
cam lever can be tightly closed.
FRA
ESP
note
the yoke should have resistance
to rotation.
4
close the quick release cam lever,
ensuring that the lever handle is
facing away from the bicycle wheel.
BURLEY.COM
Publicidad
