Publicidad
Idiomas disponibles
Idiomas disponibles
Rear Fork Assembly
1
rotate rear fork out of trailer body
to align upper holes of fork with
holes of the trailer body.
Rear Wheel Installation
1
Insert the wheel release skewer
through the hub of the wheel, making
sure there is a spring on either side of
the hub. Screw the nut on loosely.
coHo Xc
With the holes lined up, slide the rear fork retaining
pin through the holes to secure the fork in position.
Secure rear Fork retaining pin with provided clip.
2
Place the wheel in the wheel dropouts.
ENG
DEU
2
3
With the Qr handle perpendicular to the wheel,
tighten the nut so that you feel resistance
halfway through closing the lever. do not tighten
the quick release lever by spinning the lever.
close the quick release lever.
FRA
ESP
WARNING
SEcurELY cLAMPInG tHE
QuIcK rELEASE SYStEM
tAKES conSIdErABLE
ForcE. tHE AdJuStMEnt
nut SHouLd BE tIGHtEnEd
EnouGH tHAt tHE cLoSInG
ForcE oF tHE LEVEr
LEAVES A cLEAr IMPrInt
In Your PALM. do not
AdJuSt tHE Qr LEVEr BY
rotAtInG tHE LEVEr.
9
ASSEMBLY & uSE
Publicidad
