Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 10 Donnerstag, 9. Oktober 2003 11:46 11
EN
Removing damaged coatings, e. g. paint,
adhesives, underseal.
Removing carpet adhesive residue
(e. g. on stairs or other small to
medium-sized areas).
With flexible scraper
Light scraping work.
Removing stickers from glass surfaces.
Removing old silicone filler.
Operating tips:
When scraping soft material
(e. g. wood), keep the scraper flat on
the surface and apply light pressure,
otherwise the scraper may cut into the
material (diagram). If required, clamp
the scraper the other way round; this
reduces scraping pressure.
If required, sharpen the scraper blade:
While the power tool is running, hold
the scraper against a whetstone or
abrasive paper.
Select a high oscillating frequency
(if power tool is adjustable).
MAINTENANCE.
!
Risk of injury
caused by the power tool unintentionally
switching ON.
Before cleaning the power tool, ensure
that you disconnect the plug from the
power supply.
Once a week or more often if the power
tool is used frequently:
Clean the cooling-air apertures,
e. g. with a small brush.
10
MSxe 636 II / MSx 636 II
!
Risk of injury
Only authorized service centers may serv-
ice, check and repair the power tool in
accordance with currently valid national
regulations.
Maintenance and repairs.
We recommend our customer-service
department (central repairs), FEIN author-
ized service centers or agencies.
Addresses can be found at the end of this
operating instructions.
Please give these operating instructions
to the repair workshop. A breakdown of
spare parts can be found at the end of
these operating instructions.
Use only original FEIN spare parts.
SPARE PARTS.
A breakdown of spare parts can be found
at the end of these operating instructions.
Part no. (1), order reference number (2)
and quantity of spare parts (3) will facili-
tate ordering.
ACCESSORIES.
Use only accessories which are recom-
mended in the operating instructions.
GENERAL INFORMATION.
Unique feature. Oscillation.
The oscillating movement of your "Multi-
Master" has distinct advantages which no
other electric power tool can offer:
No recoil when sanding in corners and
along edges.
High cutting performance right into the
corner.
Minimum operating noise without
independent movement of power tool.
Publicidad
