Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 7 Donnerstag, 9. Oktober 2003 11:46 11
MSxe 636 II / MSx 636 II
Personal protective equipment.
When using this power tool, wear the fol-
lowing protective equipment:
Safety glasses/goggles, hearing protection,
breathing mask.
Intended use.
This power tool is intended for dry-sand-
ing small surfaces. With attached accesso-
ries the power tool can also be used for
polishing, filing, cutting, parting, sawing
and scraping.
Definition of symbols.
V
volts.
A
amperes.
Hz
hertz.
W
watts.
min minutes.
~
alternating current.
class II construction.
FUNCTIONAL DESCRIPTION.
1
Switch
For switching ON/OFF the power
tool.
2
Oscillating frequency selector
(MSxe 636 II)
Select oscillating frequency step-
lessly.
1 = lowest oscillating frequency.
8 = highest oscillating frequency.
3
Tools
Attach tools with locking screw.
(a)
Sanding pad.
(b)
Segmental saw blade.
(c)
Rigid scraper.
(d)
E-cut saw blade.
4
Sanding sheet
Attach sanding sheet to pad.
5
Supplied accessories
(a)
5 mm Allen key.
(b, c) Locking-screw set.
(d)
Sanding pad.
(e)
10 sanding sheets per grain size 60,
80, 120.
(f)
Saw blade (MSxe 636 II).
(g)
Rigid scraper.
(h)
E-cut saw blade (MSx 636 II).
OPERATION.
Switching ON/OFF the power tool (1).
First check the cable and plug for dam-
age.
Switching ON the power tool:
Slide the switch forwards ( I ).
Switching OFF the power tool:
Slide the switch backwards ( 0 ).
Selecting the oscillating
frequency (2). (MSxe 636 II)
Select the oscillating frequency while
the motor is running.
The oscillating frequency is dependent
on the accessory and type of application,
e. g.:
- High oscillating frequency:
Sanding, sawing, scraping, filing, polish-
ing (stone, metal).
- Low oscillating frequency:
Polishing (paint).
EN
7
Publicidad
