Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 9 Donnerstag, 9. Oktober 2003 11:46 11
MSxe 636 II / MSx 636 II
Precise straight cuts without fraying at
an exact width of 0.5 mm.
Removing old putty from windows.
Working with depressed saw blade,
level with the surface without incon-
venient locking screw.
Interior work.
Furniture restoration.
Trimming parquet floor or wooden
ceiling laths in corners.
Model building and handicrafts.
Machining metal sheet (vehicles).
Operating tips:
Workpiece must not vibrate; secure
small workpieces.
In the case of metal sheets, simply
plunge the oscillating power tool at the
desired point into the workpiece (dia-
gram).
For a longer service life, lubricate
the saw line with cutting paste or
grease.
Loosen a worn saw blade and turn.
Select a high oscillating frequency
(if power tool is adjustable).
Sawing with E-Cut saw blade (3d).
Safe operating:
Before using the E-cut saw blade, read
and
comply with these operating instruc-
tions.
Risk of injury! The saw teeth are very
sharp. Do NOT touch them when
installing and using the saw blade.
Before sawing, ensure that there are no
live cables in the cutting path.
The workpiece which is to be sawn
must be securely fitted in position or
clamped.
Attaching the E-cut saw blade:
Clamp the E-cut saw blade perpendicu-
lar to the power tool. Secure the saw
blade with the clamping screw with
large washer. Remove the protective
cover with care.
Application:
Use the E-cut saw blade for sawing
wood, plasterboard and soft plastics.
NOT suitable for sawing metal (e. g.
nails) and stone.
Operation tips:
The E-cut saw blade must always be
attached perpendicular (90°) to the
power tool. NEVER jam the saw blade
in the gap. Do NOT exert pressure
when guiding the E-cut saw blade along
the cutting path.
When inserting the E-cut saw blade
into the workpiece or when sawing,
move the saw blade gently backwards
and forwards to ensure removal of
sawdust.
When sawing near hard materials
(stone/metal), ensure that the E-cut
saw blade is kept at a distance of
approx. 3 mm, as there is an increased
risk of the outer saw teeth breaking.
Scraping.
Typical applications:
With rigid scraper
EN
9
Publicidad
