Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 5 Donnerstag, 9. Oktober 2003 11:46 11
MSxe 636 II / MSx 636 II
Operating instructions for M
GENERAL SAFETY RULES.
!
WARNING! Read and understand all
instructions.
Failure to follow all instructions listed
below, may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Work Area.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children, and visitors
away while operating a power tool. Distrac-
tions can cause you to lose control.
Electrical Safety.
Double Insulated tools are equipped with
a polarized plug (one blade is wider than
the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install a polarized outlet. Do not change
the plug in any way. Double Insulation
eliminates the need for the three wire
grounded power cord and grounded
power supply system.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of elec-
tric shock if your body is grounded.
M
.
Don't expose power tools to rain or wet con-
ULTI
ASTER
ditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged
cords immediately. Damaged cords
increase the risk of electric shock.
When operating a power tool outside, use
an outdoor extension cord marked "W-A" or
"W". These cords are rated for outdoor
use and reduce the risk of electric shock.
Hold tools by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator.
Personal Safety.
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention
while operating power tools may result
in serious personal injury.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from mov-
ing parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is
off before plugging in. Carrying tools with
your finger on the switch or plugging in
tools that have the switch on invites acci-
dents.
Remove adjusting keys or switches before
turning the tool on. A wrench or a key that
is left attached to a rotating part of the
tool may result in personal injury.
EN
5
Publicidad
