Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 11 Donnerstag, 9. Oktober 2003 11:46 11
MSxe 636 II / MSx 636 II
The oscillating movement transforms
your "MultiMaster" into a multi-purpose
power tool:
Sawing
- Although no inconvenient guards
fitted, risk of injury is minimal.
- Clean and straight cut, precise to within
a millimetre.
- Can be plunged at any point into the
workpiece.
- Cutting depth automatically deter-
mined.
- Low dust formation.
- No sparks when sawing sheet metal.
Scraping – minimum effort required.
Rasping – extremely high cutting per-
formance.
Cutting (blade) – hard and soft materials.
Cutting (grinding wheel) – low dust
formation when cutting into plaster and
grout.
SPECIFICATIONS.
Order reference number
Type
Voltage/Frequency
Rated input
Oscillations of sanding pad
Sanding-pad dimensions
(corner-to-corner measurement)
Weight
Safety Class
The A-weighted sound pressure level of the power tool is typically less than 75 dB (A).
During operation of the power tool the noise level may exceed 85 dB (A).
Wear ear protection!
The hand-arm vibration is typically less than 2.5 m/s
Polishing – puts a shine on stone, metal
and paint.
WARRANTY.
FEIN power tools are guaranteed in
accordance with statutory and national
regulations (evidence of purchase by
invoice or delivery note).
Damage caused by improper handling,
overload or normal wear shall be
excluded from the warranty.
Please contact our customer-service
department (repair center), FEIN author-
ized service centers or agencies.
PROTECTION OF THE
ENVIRONMENT.
Recycle packaging, out-of-service power
tools and accessories.
7 229 27
MSxe 636 II
120 V/60 Hz
160 W
12000 – 21000/min
(approx.)
80 mm
1.1 kg
II
2
.
EN
7 229 26
MSx 636 II
21000/min
(approx.)
11
Publicidad
