Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL REMARKS
PRINCIPLE OF THE TP 1400 MV
The TP 1400 MV is a further member of the new generation of welding rectifiers.
High-performance electronics have helped create a truly unique rectifier that
weighs in at a mere 4.4 kg.
The voltage from the mains is first rectified. A high-speed transistor switch
chops this direct voltage at a frequency of up to 100 kHz. The welding
transformer then creates the required operating voltage, which is rectified and
delivered to the output sockets. An electronic controller adjusts the power-
source characteristic to the electrode that is to be welded.
The unit's compact dimensions, low weight and very modest power consump-
tion are real advantages in its favour. Its superb ignition and welding
properties, coupled with the fact that it can also be used as a TIG welding
machine, extend its range of use and application still further.
Fig.1
TransPocket 1400 MV
MACHINE CONCEPT
The TP 1400 MV may only be small, but it is built to function dependably under
even the toughest operating conditions. Features such as its powder-coated
sheet-steel housing, the way its controls are protected by a plastic frame, and
its bayonet-latching connection sockets all testify to the high quality of its
design. Thanks to its carrying strap, the machine is easy to move around -
both in the workshop and out in the field.
AREAS OF USE
Fig.2
TransPocket 1400 MV as a
manual electrode welding unit
Fig.3
TransPocket 1400 MV as a TIG
welding unit
DESCRIPTION OF CONTROLS
Fig.4
Controls on the welding machine
Fig.5
Controls and indicators on the operating panel
Mains switch
Operational readiness indicator lights up when the mains switch is
shifted to "1"
Welding current dial ... for continuous adjustment of the welding current
Malfunction indicator ... lights up when the unit is thermally overloaded
(i.e. overheats)
Electrode / TIG changeover switch ... for selecting the desired welding
process
- Current socket with bayonet latch ... for connecting:
- Manual electrode or earthing cable for manual electrode welding
(depending on type of electrode)
- Earthing cable for TIG welding
- Current socket with bayonet latch ... for connecting:
- Manual electrode or earthing cable for manual electrode welding
(depending on type of electrode)
- Welding torch for TIG welding (current connection)
6
Publicidad
