battioni Pagani GARDA EVO Serie Manual De Instrucciones De Uso Y Mantenimiento página 144

instruction manual
for use and maintenance of the combined groups for the GARDA EVO series
41
page 126
33
26
25
Pay attention when removing
the block.
Remove the block, consisting
of crowns and lever rod, to
then disassemble it.
27
32
Remove the shaft 41 of the lever
from the Sliding Hub 25.
Loosen the 8 screws 27.
Disassemble the two toothed
wheels 26 – 32 and the spacer 33.
Check the toothed wheels and
if necessary replace them.