Publicidad
Idiomas disponibles
Idiomas disponibles
7.4 DISASSEMBLY INSTRUCTIONS OF GARDA EVO IN CONFIGURATION
GK OUTPUT "A"
Loosen the 4 screws 51 and
remove the 4 washers 50.
Remove the support 68
and the seal 49.
Check the seal and if
necessary replace it.
Remove the shaft 40.
Remove the toothed wheel 39.
Remove the oil seal 53.
Remove the bearing 44.
Remove the bushings 38 and 43.
Check the oil seal and if
necessary replace it.
Check the toothed wheel and
if necessary replace it.
Check the bearing and if
necessary replace it.
for use and maintenance of the combined groups for the GARDA EVO series
51
40
44
53
68
50
43
Instruction manual
49
39
38
page 129
Publicidad
