61
59 - 62 - 63 -
64 - 65 - 66
8 - MAINTENANCE, INSPECTIONS AND CHECKS, REPAIRS,
When carrying out maintenance operations, inspections, checks or repairs it is advisable to wear the individual
protective devices listed in this manual. All maintenance operations, inspections, checks and repairs should
be carried out with the greatest care and with the tractor not running and the power take-off disconnected
according to the version of the GARDA EVO group. The operations must be performed by competent
personnel. In the case of painting of the GARDA EVO group do not paint the identification plate, taps, oil
sight glass and the vent plugs. Immediately replace safety devices that are fully or partially damaged.
8.1 - PERIODIC MAINTENANCE
MAINTENANCE
TO BE PERFORMED
Check the oil level in the Garda Evo
gearbox.
Wash the gearbox
Change the oil in the gearbox
for use and maintenance of the combined groups for the GARDA EVO series
60
58
57
METHODOLOGY
OF EXECUTION
Use the oil level plug
See paragraph 8.2 washing the
gearbox
Open the oil drain plug, close it and
introduce new oil through the oil
filling plug
Instruction manual
Insert the dowels, the springs 58
and the balls 57 into the levers
(consisting of 59 – 62 - 63 – 64 – 65 – 66)
and then screw the nuts 61.
FREQUENCY
Once a month
Once a year
Every 300 hours of actual work
page 139