Husqvarna 1-8DM Manual De Usuario página 11

1. Loosen the 2 adjustment screws at the rear to set
the correct height.
2. Tighten the screws.
3. Turn the nuts at the front to set the correct height.
4. Tighten the nuts.
To adjust the height of the brush list
seals
The correct height of the brush list seals is 1/32 in./1 mm
from the surface.
2043 - 001 - 07.02.2023
1. Loosen the 2 adjustment screws (A) at the front and
rear of the blast housing to set the correct height.
2. Adjust the height (B).
3. Tighten the 2 screws.
To adjust the height of the rubber seals
The correct height of the rubber seals is 1/32 in./1 mm
from the surface.
A B
11