neofeu ASC'O Manual Del Usuario página 25

that are particularly aggressive, marine, siliceous or chemical can reduce the service life of PPE. In
these cases, special care must be taken regarding protection and the inspections before use. The
mandatory annual inspection will validate the correct functioning of the mechanism and it can only
continue to be used on obtaining a written agreement from the manufacturer , its representative
or a competent person.
As concerns what has been mentioned above, the rough estimate of the service life of the
products, as recommended by NEOFEU, is ten (10) years.
- Ensure that the identification sheet and the maintenance monitoring table is kept up to date from
the time of the commissioning and during each inspection.
INTERPRETATION OF MARKINGS #4
Marking of the mobile fall arrester #7.1
(1) Manufacturer's identifier, (2) Product reference, (3) Model name, (4) S/N: Serial number -
Manufacturing batch, (5) Type of appropriate flexible anchor line, (6) Reference standard: year
of issue, (7) CE marking/Notified body number, (8) Pictogram requiring reading of the instructions
before use, (9) Contact address, (10) Maximum permissible nominal load, (11) Indication of the
opening of the mobile fall arrester, (12) Indication of the position of the locking button, (13) Direction
of use of the mobile fall arrester along the flexible anchor line, (14) Group logo, (16) Date of
manufacture.
Specific marking of the anchor line EN353-2 #7.2
(15) Reference of the flexible anchor line, (17) Expiry date, (18) Length in metres of the flexible
anchor line.
Specific marking for horizontal use RfU.75 #7.3
(19) Pictogram indicating that the product has been tested in a horizontal configuration.
This product is compliant with Regulation 2016/425. It meets the requirements of harmonized
standard EN353-2: 2002. The declaration of conformity is available at : www.neofeu.com.
Notified body for UE type examination : APAVE SUD EUROPE SAS (N°0082) – CS 60193 –
F13322 MARSEILLE CEDEX 16
Notified body for production control : AFNOR CERTIFICATION (N°0333) - 11, rue Francis de
Pressensé - FR 93571 LA PLAINE SAINT DENIS Cedex
25