Publicidad
Idiomas disponibles
Idiomas disponibles
COMPLETING RAIL INSTALLATION (continued)
SRE-3000 INSTALLATION 02-08-2019
Fig. 3
Fig. 4
Fig. 5
Fig. 6
3. Insert last gear rack section into upper
rail.
For folding rail installations:
Fish black charge cable up through
upper rail (see Figs . 3 and 4) .
Cable wires will fit between spacer
and end of rail .
Connect charge harness to charge
contact and charger (Fig .5) .
Stuff remaining harness into end of
rail (Fig . 6) .
Mount provided spacer endplate
(in kit SRE-K-3050) between top of
endplate and end of rail to prevent
damage to components (Fig. 7) .
See Fig. 8 for a finished endplate
example .
4. Add top endplate.
Use a 1/2" socket and ratchet to mount
top endplate using two (2) 5-16" - 18x1"
self-threading hex head screws.
Fig. 7
23
©Bruno Independent Living Aids, Inc.
INSTALLATION
Fig. 8
®
Publicidad
