Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE YOUR APPLIANCE
Cleaning Agent
With good care and cleaning, your appliance will retain its appearance and remain fully
functioning for a long time to come. We will explain here how you should correctly care
for and clean your appliance.
To ensure that the di erent surfaces are not damaged by using the wrong cleaning
agent, observe the information in the table. Depending on the appliance model, not all of
the areas listed may be on/in your appliance.
Caution!
Risk of surface damage
Do not use:
1.
Harsh or abrasive cleaning agents.
2.
Cleaning agents with a high alcohol content.
3.
Hard scouring pads or cleaning sponges.
4.
High-pressure cleaners or steam cleaners.
5.
Special cleaners for cleaning the appliance while it is hot.
Wash new sponge cloths thoroughly before use.
Tip
Highly recommended cleaning and care products can be purchased through
the after-sale service.
Observe the respective manufacturer's instructions.
Area Appliance exterior
Appliance exterior
Stainless steel front
Plastic
Painted surfaces
Control panel
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Remove flecks of limescale, grease, starch and albumin (e.g. egg
white) immediately.
Corrosion can form under such flecks.
Special stainless steel cleaning products suitable for hot surfaces
are available from our after-sales service or from specialist retailers.
Apply a very thin layer of the cleaning product with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not
use glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not use
glass cleaner or a glass scraper.
Cleaning
19
Publicidad
