2.
Shadows on the door panels, which look like streaks, are caused by reflections made
by the interior lighting.
Enamel is baked on at very high temperatures. This can cause some slight color varia-
3.
tion. This is normal and does not a ect operation. The edges of thin trays cannot be
completely enameled. As a result, these edges can be rough. This does not impair the
anti-corrosion protection.
Always keep the appliance clean and remove dirt immediately so that stubborn
4.
deposits of dirt do not build up.
Tips
Clean the cooking compartment after each use. This will ensure that dirt cannot be baked on.
1.
Always remove flecks of lime scale, grease, starch and albumin (e.g. egg white) immediately.
2.
Remove flecks of food with sugar content immediately, if possible, when the fleck is still warm.
3.
Use suitable ovenware for roasting, e.g. a roasting dish.
4.
Pyrolytic self-cleaning function
Your appliance is equipped with " Pyrolytic Self-cleaning " mode.You can use this mode to
clean the cooking compartment effortlessly.
The cooking compartment is heated up to a very high temperature. Residues from roasting,
grilling and baking will burn. For now we only provide one cleaning setting for your safety ,
the temperature and operating time can not be adjusted with this operating mode.
Notes
For your safety, the cooking compartment locks door automatically. It cannot be opened
until the temperature reduces to a section which is relatively safe. The interior lighting re-
mains off during cleaning.
WARNING
Risk of burns!
1. The cooking compartment becomes extremely hot during the pyrolytic mode. Never open the
appliance door. Allow the appliance to cool down. Keep children , disabled and old people
without self-care ability away from the appliance.
2. The appliance will become very hot on the outside during the cleaning function. Never touch
the appliance door. Allow the appliance to cool down. Keep children , disabled and old people
without self-care ability away from the appliance.
21