Publicidad
Idiomas disponibles
Idiomas disponibles
Setting pyrolytic self-cleaning mode
1. Switch on the oven by pressing the button
2. Select the " Pyrolytic" operating mode by pressing
When the function area is changed to an icon shows
3.Check if all the accessories and foods are removed , get the door well closed.
4.Press the " Start/stop" button
Ventilate the kitchen when the cleaning function is running.
The cooking compartment locks the door shortly after operation starts. The cooking
compartment cannot be opened until the temperature reduces to a section which is rel-
atively safe.
Pyrolysis mode end signal
An audible signal sounds continuously and the oven stops heating. It means pyrolytic
mode gets finished. You can press the button
will turns off automatically later.
Furnace door cannot be opened
Once the pyrolysis mode is activated, the oven will automatically lock and the furnace
door cannot be opened.
Adjusting the cleaning setting
Once cleaning starts, you cannot change any setting expect pausing and stopping
Once the pyrolytic mode has finished
Once the cooking compartment has cooled down, use a damp cloth to wipe off the
ash that has been left behind in the cooking compartment and around the appliance
door.
.
to start the cleaning operation.
to turn off the sounds, or the sounds
23
.
,it means pyrolytic mode.
Publicidad
