BRAND PLT Instrucciones De Manejo página 66

7 Make settings
7.3 Inspection date
The date on when the PLT unit should be sent to BRAND or an authorized repair shop for testing can
be set individually. This date is displayed each time the unit is switched on.
What to do
1. Select "Settings"
on the Main Menu
2. Confirm the set-
tings
3. Select the in-
spection date
4. Call up the in-
spection date
5. Set the inspec-
tion date
6. Confirm the in-
spection date
66
Operating manual
How to do it
Press the select knob to call
up the Main Menu.
Press the "Execute" button.
The "Settings" submenu is
called up.
Turn the select knob to the
"Inspection Date" setting.
Press the "Execute" button.
The previously set inspection
date is displayed.
Press the select knob to
switch between year, month,
and day. The selected posi-
tion is shown with a frame
around it.
(To go back to the "Settings"
menu, press the select knob
with the "Day" position se-
lected.)
Turn the select knob to
change the value of the se-
lected parameter.
Press the "Execute" button.
The display returns automati-
cally to the "Settings" menu.
Button to use Display
Main Menu
Pipette Type
Self Test
Switch OFF
Settings . . .
select
back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select
back
Inspection date
23 January 2023
o.k. back
Inspection date
23. January 2023
o.k.
back
Settings
Language
Contrast
Inspection date
Auto-Power-Off Time
select
back
PLT unit 997960