Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT CHARACTERISTICS
The chainsaw is only intended for cutting wood. Due to the combustion engine used to drive the saw, it is only possible to cut in
open spaces or in suitably prepared rooms. The chainsaw can also be used for cutting trees and taking care of them, but due to the
hazard, it is required that an experienced user performs these operations. Proper, reliable and safe operation of the tool depends
on appropriate use, that is why you should:
Read the entire instructions manual before the first use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the tool, failure to observe the safety
regulations and recommendations of this manual. Using the tool for purposes other than those for which it was intended shall
cause the loss of the user's rights to a warranty and statutory warranty.
EQUIPMENT
The chainsaw is supplied complete but requires assembly before first use. The following elements are supplied with the power
saw: a chain guide bar, a cutting chain and a guard for the guide bar.
3. TECHNICAL DATA
Parameter
Part no.
Weight
Fuel tank capacity
Chain lubrication oil tank capacity
Cutting length
Chain scale
Max. chain speed
Guide link thickness
Chain type
Chain guide bar type
Number chain drive wheel teeth and scale
Engine
number of cylinders
number of strokes
cooling
Sparking plug type
Engine displacement
Engine power
Maximum recommended engine speed with cutting system
Recommended idling speed
Fuel consumption at max. engine power
Noise
sound pressure
power L
WA
Vibration level - front / back handle
GENERAL SAFETY INSTRUCTIONS
Warning! The chainsaw is of a special type, designed especially for tree care. The chainsaw is intended for use only by a trained
operator using carefully designed work safety systems. The chainsaw may only be used for tree care if the above conditions are
met. The chainsaw is designed to be held with two hands just like a traditional chainsaw.
WARNING! When operating the tool, it is recommended that you always observe basic safety principles, including those listed
below, to reduce the risk of fire, electric shock and avoid injury.
Read the entire instruction manual before operating the tool and keep it.
CAUTION! Read all the following instructions. Failure to do so may result in electric shock, fire, or personal injury.
OBSERVE THE FOLLOWING INSTRUCTIONS
Place of work
O R I G I N A L
18
EN
Unit
[kg]
[cm
]
3
[cm
]
3
[cm / ‚']
[mm]
[m/s]
[mm]
[cm
]
3
[kW]
[min
]
-1
[min
]
-1
[kg/h]
[dB (A)]
[dB (A)]
[m/s
]
2
I N S T R U C T I O N S
Value
YT-84893
3.94
280.
200.
30 / 12
9.525
12.95
1.27
HY-JL9D-0.050*45
ZLA12-15-509P
6T x 9.525 mm
1.
2.
Air cooling
L8RTF
25.4.
0.75
8500.
3000.
0.360.
95.4 ± 3.0
108.4 ± 3.0
7.199 ± 1.5 / 7.492 ± 1.5
Publicidad
