Bosch GCM18V-12GDC Instrucciones De Funcionamiento Y Seguridad página 16

Unpacking the Miter Saw – When removing this tool
from packaging materials, reach down to the two side
carry-handle locations and slowly lift until it clears the
package.
To avoid severe pinching,
never lift or move this saw by
gripping any component of the mechanism support
system.
This symbol is placed at various locations on
the tool to warn the user of pinch-point
areas.
Loose Parts - 1 of each shown
6/4mm Hex Key
Miter Lock Knob
16
Unpacking And Checking Contents
Workpiece Clamp
2.5mm Hex Key
Checking Contents in Package – Open the top of the
package and look for the included loose parts. Refer to
the diagram below.
Some small parts such as the bevel lock lever and miter
lock knob require attachment to the tool before it is
ready for use – See "Attaching Loose Parts" on page
18.
Check off for each part
Manual