Husqvarna K 535i Manual De Usuario página 16

2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4. When all LEDs on the battery come on, the battery is
fully charged.
A
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger
manuals for more information.
745 - 008 - 12.11.2018
B C D
To connect coolant water
1. Connect the water hose to the water supply (A).
A
2. Turn the water tap (B) to let the water go or stop.
3. Examine if leakage occurs in the water connection or
the hose.
4. Make sure water pressure do not go by maximum
permitted water pressure, refer to
To start the product
1. Do a check of the power trigger and power trigger
To do a check of the power trigger
lockout. See
lockout on page 20 .
2. Put the battery in the battery holder.
3. Press on the lower part of the battery until you hear
a click sound. If the battery does not move into the
battery holder easily, it is not attached correctly into
the battery holder.
B
Technical data .
15