Publicidad
Idiomas disponibles
Idiomas disponibles
y Wear suitable work clothes. Do not wear loose-fitting cloth-
ing or jewellery. These can get caught in the moving machine
parts. Wearing safety glasses and hearing protection is strong-
ly recommended.
y Never insert an object into an opening of the machine.
y The noise of the clipper can trouble animals. A kick or the body
weight of the animal can cause significant injuries. Fix the ani-
mal sufficiently, approach the animal from the front and switch
on the machine already in the animal's field of vision.
y Clipping of animals should only be done when unauthorised
persons do not have access to the clipping site.
y Only clip in well-ventilated areas (dust) and never near explo-
sive objects or gases.
y Caution: Danger of blocking! The machine must not be operat-
ed without the blades mounted.
y Generally, never plunge the clipper and clipper head into liq-
uids such as water, soapy water, diesel, petrol, or anything
else. This leads to considerable damage to the mechanics and
engine.
WARNING!
These safety instructions must be followed all the time. It is rec-
ommended to always use a residual current safety plug when
working with electrical devices.
3.2
Clipping adjustment with adjusting screw
Make the setting during commissioning as follows:
3.2.1 Before clipping
When the machine is switched off, tighten the regulating screw until the
X
first noticeable resistance is felt. Then screw the adjusting screw another
1/4 turn.
After each new setting, check the cutting power on the animal and only
X
then continue turning.
Translation of the original instructions / Clipper
11
Publicidad
