General Information - WIKA PSD-3 Serie Manual De Instrucciones

1. General information

1. General information
The pressure switch described in the operating instructions has been designed and manufactured
■
EN
using state-of-the-art technology. All components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument. Working
■
safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the
■
instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate vicinity of the
■
instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions, prior to
■
beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the product contrary
■
to its intended use, non-compliance with these operating instructions, assignment of insufficiently
qualified skilled personnel or unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
PE 81.67
Tel.: (+49) 9372/132-8976
E-mail: support-tronic@wika.de
WIKA operating instructions pressure switch, model PSD-3x