Publicidad
3.
Position
Secure/Sécuriser/Asegure
Leveler
Leg
Vérin de
Pied
mise à niveau
Pata
Nivelador
Secure
Insert four (4) cams into the front rail, four (4) cams into the back rail, and six (6)
cams into the drawer assembly.
Using a Phillips screwdriver, turn the cam locks one quarter turn clockwise.
Insert the levelers into the legs. If necessary, use a rubber mallet to properly seat
the levelers.
Position
Lift and place the vanity in position against the finished wall, as shown. Do not
drag the vanity in position.
Verify the vanity is level and plumb. If necessary, turn each leveler (clockwise to
raise, counterclockwise to lower).
Drill pilot holes through the rear rail, finished wall, and into the backing material.
Insert lag bolts (not provided) into the holes, then tighten the lag bolts.
Position
Sécuriser
Insérer quatre (4) cames dans le rail avant, quatre (4) cames dans le rail arrière et
six (6) cames dans l'ensemble de tiroir.
Utiliser un tournevis cruciforme pour tourner les serrures d'un quart de tour dans
le sens des aiguilles d'une montre.
1106935-2-A
Position/Positionner/Coloque
Cams
Cames
Levas
Cams
Cames
Levas
10
Kohler Co.
Publicidad
