Publicidad
Idiomas disponibles
Idiomas disponibles
Match ignition ranges
(On some models)
1
Make sure control knobs are in the OFF position.
2
Light a match.
3
Push in and turn to the lighting setting the control knob that controls the burner you
want to use.
4
Carefully approach the lighted match to the burner.
Button electronic ignition ranges
(On some models)
When pushing the button or turning the knob, ignitors will automatically spark
on all burners. This is normal.
1
Make sure knobs are in the off position, if equipped with mechanism knobs, they should
be in the "out" position. Make sure range is plugged in to electric power.
2
Press and hold the electronic ignition button, marked
with a thunder icon, you will hear the characteristic
sound of the burner's electric ignitor.
3
Press the knob that corresponds to the burner you want
to use and turn it to the ON setting, the burner will
light within few seconds. Once lit, release the button
and regulate the flame size turning the knob.
IN THE EVENT OF A POWER OUTAGE, YOU CAN LIGHT SUR-
FACE BURNERS BY APPROACHING A LIT MATCH TO THE
BURNER, THEN CAREFULLY TURN THE KNOB TO THE ON SET-
TING. BE CAREFUL WHEN TURNING ON THE BURNERS THIS
WAY.
BURNERS THAT WERE LIT AT THE MOMENT OF THE POWER
OUTAGE WILL STAY OPERATING NORMALLY UNTIL THEY ARE
TURNED OFF.
36
Publicidad
