Panasonic KX-PRSA10EX Manual De Instalación página 3

Setting up
Connections
Connect the AC adaptor plug to the unit until you hear a click.
Connect the AC adaptor to the power outlet.
KX-PRSA10: Fasten the cord by hooking it.
n KX-PRSA10
Note:
R Use only the supplied Panasonic AC adaptor PNLV233CE.
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN: Select your desired language. a MOKN a M
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
Charge for about 7 hours.
R Confirm "Charging" is displayed (B).
R When the batteries are fully charged, "Fully charged" is displayed.
PRSA10_PRWA10(en)_1221_ver401.pdf
1
3
2
,
3
n KX-PRWA10
N
).
Installation
1
2
3
2016/12/21 16:28:32