Descargar Imprimir esta página

BH FITNESS BZ6440 Manual De Instrucciones página 11

Ocultar thumbs Ver también para BZ6440:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Remove the safety key (g) whenever
the machine is not being used and keep
it out of children's reach. Pressing the
red button marked STOP will also stop
the unit immediately. To restart it, press
the button marked START/STOP again.
ELEVATION.-
The
inclination
independently of all other functions.
Each time that you set switch (L) to
position I, as described in the Starting
section, Fig.1. the inclination level that
was last used will be displayed.
If inclination is not at zero when the
START/STOP key is used to begin
exercising, the machine will zero itself
while it is starting.
You can adjust the elevation level by
pressing the INCLINE(+) or INCLINE
(-) keys to specify a value of 0 to 15,
depending on how you would like to
do the exercise.
Important:
Do
inclination level of your treadmill by
propping it up on objects.
function
operates
not
change
IMPORTANT:
LEVEL MUST BE AT ITS LOWEST
SETTING
TO PUT THE TREADMILL INTO THE
FOLDED POSITION.
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
appear after a few seconds. The heart
symbol beside the pulse rate value will
flash in time with your heart rate,
Fig.3.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown
purposes.
THE MANUFACTURER RESERVES
THE
RIGHT
the
SPECIFICATIONS
PRODUCTS
NOTICE.
11
THE
INCLINATION
BEFORE
ATTEMPTING
is
merely
for
TO
MODIFY
WITHOUT
guideline
THE
OF
ITS
PRIOR

Publicidad

loading