Publicidad
Idiomas disponibles
Idiomas disponibles
English
Mounting the Control Handle
3
2
Push the control handle (1) onto the
N
mount (2) .
Insert and tighten down the
N
screws (3) firmly.
6
4
5
Engage the throttle cable (4) with
N
sleeve (5) in the retainer (6).
12
Adjusting the Control Handle
1
Open the clamping lever (3).
N
Move the control handle (1) along
N
the blower tube (2) to the most
comfortable position.
Close the clamping lever (3).
N
Mounting the Nozzle (BR 800 C)
2
Push the nozzle (1) onto the blower
N
tube (2) and engage it on the
lugs (3).
1
2
3
3
1
Mounting the Nozzle (BR 800 C)
3
1
2
Rotate the nozzle (1) in the direction
N
of the arrow until the lugs (3) are
covered.
Pull the nozzle (1) off the blower
N
tube (2).
Mounting the Nozzle (BR 800 X)
3
2
Push the nozzle (1) onto the blower
N
tube (2) and engage it on the
lugs (3).
Rotate the nozzle (1) in the direction
N
of arrow as far as the stop.
BR 800, BR 800 X
1
Publicidad
