Publicidad
Idiomas disponibles
Idiomas disponibles
English
Adjusting the Throttle Cable
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set the throttle trigger to the full
N
throttle position.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
14
Fitting the Harness
Adjusting the Harness
A
B
A
Pull the ends of the straps to tighten
the harness.
B
Lift the tabs of the adjusters to
loosen the straps.
C
D
C
Close the buckle by pushing the two
parts together.
D
Squeeze the hooks to open the
buckle.
BR 800, BR 800 X
Publicidad
