Publicidad
Idiomas disponibles
Idiomas disponibles
English
Specifications
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL 4-MIX Engine
Displacement:
4.88 cu.in
(79.9 cc)
Bore:
1.97 in
(50 mm)
Stroke:
1.60 in
(40.7 mm)
Idle speed:
2,500 rpm
30
Ignition System
Electronic magneto ignition
Spark plug (resistor
type):
NGK CMR 6 H
Electrode gap:
0.02 in (0.5 mm)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 67.6 fl.oz. (2.0 l)
Blowing Performance
Blowing force:
41 N
Air velocity:
199 mph
(89 m/s)
Air flow rate:
912 cf/min
(1550 m
Maximum air velocity:
239 mph
(107 m/s)
Maximum air flow rate
1192 cf/min
without blower tube:
(2025 m
Weight
dry:
BR 800 C:
25.8 lbs (11.7 kg)
BR 800 X
23.1 lbs (10.5 kg)
Maintenance and Repairs
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.
3
/h)
3
/h)
BR 800, BR 800 X
Publicidad
