Publicidad
Idiomas disponibles
Idiomas disponibles
With the blower on your back, make
N
sure that bystanders are well clear
of the nozzle outlet.
Make sure you have safe and
N
secure footing.
Hold blower tube with your right
N
hand on the control handle.
Pull the starter rope steadily with
N
your left hand, allow it to rewind and
continue pulling until the engine
starts.
Do not pull out the starter rope all
N
the way – it might otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
BR 800, BR 800 X
If engine does not start
Choke knob
If you did not turn the choke knob to o
quickly enough after the engine began to
start, the combustion chamber is
flooded.
1
2
Push the setting lever (1) upwards.
N
The throttle trigger (2) is in the full
throttle position.
Continue pulling the starter rope
N
until the engine runs.
Other Hints on Starting
If the engine does not start
Check that all settings are correct.
N
Check that there is fuel in the tank
N
and refuel if necessary.
Check that the spark plug boot is
N
properly connected.
Repeat the starting procedure.
N
Check adjustment of throttle cable –
N
see chapter on "Adjusting the
Throttle Cable".
Engine stalls in cold start position c or
under acceleration
Move the choke knob to o and
N
continue pulling the starter rope
until the engine runs.
Engine does not start in warm start
position o
Move the choke knob to c and
N
continue pulling the starter rope
until the engine runs.
Fuel tank run until completely dry
After refueling, depress the manual
N
fuel pump bulb at least 6 times –
even if the bulb is already filled with
fuel.
Set the choke knob according to
N
engine temperature.
Now start the engine.
N
English
21
Publicidad
