Introduction; Intended Use; Warning Used; Features - Parkside PDWS 125 A1 Instrucciones De Uso

PNEUMATIC PAINT SPRAY GUN
PDFP 500 C3

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This compressed air-powered appliance is designed
solely for the application/spraying of solvent-based
and water-soluble paints, glazes, foundation, clear
varnishes, vehicle paints, stains, wood preserva-
tives, pesticides, oils and disinfectants. The appli-
ance is not suitable for working with emulsions
or latex paints, lye, acidic coatings, granular and
gritty spray materials or spray- or drip-resistant
materials. Any other usage of or modification to the
appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage. This appliance is intended
for domestic use only.

Warning used

The following types of warnings are used in these
operating instructions:
This is the safety alert symbol. It is used to
alert you to potential injury hazards. Obey
all safety messages that follow this symbol
to avoid possible injury and death.
DANGER
► DANGER indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING
► WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
│
■ 2 US - EN
CAUTION
► CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE
► NOTICE used without the safety alert symbol
indicates potentially hazardous situation which,
if not avoided, may result in property damage.
Symbols on the compressed air tool:
Read the operating instructions
WARNING!
before use.
Always wear safety goggles.
Always wear a mask.
Always wear hearing protection.
Always wear protective gloves.

Features

Venting
Flow cup lid
Flow cup
Stroke limiter screw (paint flow-rate control)
Control for round/broad jet
Compressed-air connection
Airflow control
Trigger
Nozzle head
Needle
Spring
Brush
Filter
Screw thread (flow cup)
PDFP 500 C3