Original Accessories/Auxiliary Equipment; Safety Instructions For Fine Spray Systems - Parkside PDWS 125 A1 Instrucciones De Uso

■
Keep children and other bystanders at a
distance while operating the tool. Distractions
can cause you to lose control.
■ Disconnect the appliance from the compressed
air source before starting any repairs or main-
tenance work, as well as during any breaks in
work and before transportation.
■ When undoing the hose coupling, hold the hose
firmly in your hand to prevent injuries caused by
a thrashing hose.
■ Ensure there is no damage. Check the appli-
ance for any possible defects before use. If the
appliance exhibits any faults, it should not be
used under any circumstances.
■ Do not kink the appliance's hose. Otherwise, it
could get damaged.
■ Please heed the safety instructions provided by
the manufacturer of the spray medium.
■ Stay alert, watch what you are doing and use
common sense when operating the appliance.
Do not use any appliance while you are tired
or under the influence of drugs, alcohol or
medication.
■ Do not remove any type plates. These contain
important information for the safe operation of
the appliance.
■ If you are inexperienced with the appliance,
seek training in how to use it safely.
Original accessories/auxiliary equip-
ment
■ Use only the additional equipment and acces-
sories specified in the operating instructions.
Using accessories other than those recom-
mended in the operating instructions can lead
to a risk of injury.
│
■ 4 US - EN
Safety instructions for fine spray
systems
■ Keep your work area clean, well lit and free
of paint and solvents, cloths and other inflam-
mable materials. Possible risk of spontaneous
combustion. Have a fully-functioning fire extin-
guisher available at all times.
■ Ensure adequate ventilation in the spray zone
and sufficient fresh air in the entire room.
Evaporation of flammable solvents will cause
an explosive environment.
■ Do not spray or clean with materials whose
ignition point is lower than 69,8 °F (21 °C).
Use materials based on water, non-volatile
hydrocarbons or similar materials. The
evaporation of volatile solvents will cause an
explosive environment.
■ Do not spray near ignition sources such as
static electric sparks, open flames, ignition
flames, hot items, motors, cigarettes and
sparks caused by plugging in/unplugging
power cables or by operating switches. These
ignition sources could cause a fire to ignite in
the environment.
■ Do not spray any material if you do not know
whether it is potentially dangerous. Unknown
materials could cause dangerous conditions.
■ Wear additional personal protective equip-
ment such as suitable gloves and a protective
mask/respirator when spraying or handling
chemicals. Wearing appropriate protective
equipment for the conditions reduces your
exposure to dangerous substances.
■ Do not spray yourself, other people or animals.
Keep your hands and other body parts out
of the spray jet. If the spray jet pierces the
skin, seek medical assistance immediately. The
sprayed material can even penetrate through a
glove and into the skin and thus into your body.
■ Do not treat such a penetration injury like a
normal cut. A high-pressure jet can inject toxic
materials into the body and cause serious in-
juries. In the event of a chemical penetration of
the skin, seek medical assistance immediately.
PDFP 500 C3