Change To The Other Sewing Pattern; Temporarily Stopping The Sewing Machine - JUKI LK-1941 Manual De Instrucciones

20130424 LK-1941,1942 R08

4. CHANGE TO THE OTHER SEWING PATTERN

5.Temporarily stopping the sewing machine

You can temporarily stop the sewing machine during sewing or sewing pattern shape checking procedure.
5-1 How to temporarily stop the sewing machine
5-2. Re-starting (re-sewing)
WARNING :
The sewing machine makes a revolution and the needle goes up and comes down. So, never place
your fingers or any other thing under the needle.
1
1) Press the key. (The sewing LED will go off.)
2) Press the
"Pattern No.".
3) Set the items of 1–(2) to (5). For further steps,
return to the steps of "2. Checking the contour
of a sewing pattern".
Press temporary stop switch 1 while the sewing
machine is running.
The sewing machine stops, and "E5" will be
indicated on the operation box.
1) Press the temporary stop switch twice or press
key to make the thread trimming.
( It is not necessary to do so when the needle thread
is not tied with the cloth such as jump feed or the
like, or continuing the sewing as it is.)
2) Press or key to return the needle point to
the starting position or desired position.
( It is not necessary to do so when re-starting the
sewing from the same position.)
3) Re-starting can be made by depressing the pedal
switch.
key to indicate the item
29