Performing Sewing Using The "Bobbin Thread Counter - JUKI LK-1941 Manual De Instrucciones

3. Performing sewing using the "bobbin thread counter"

The production counter can be used as the bobbin thread counter. In case a same sewing pattern is sewn in
repitition, the sewing machine will stop sewing when the number of times (the specified number) that can be
sewn with a bobbin is reached. The bobbin thread counter is of the subtracting method.
The counter at the time of delivery is set to the production counter (adding method). If
it is used as the bobbin thread counter, it is necessary to change the memory switch.
AW-2 type cannot function.
(Refer to the item "*. HOW TO USE THE MEMORY SWITCH".)
36
1) While the sewing LED goes off, press the
key to indicate the "Counter" .
2) Then press the
specified number of times that can be sewn with a
bobbin.
3) Every time the sewing machine finishes a sewing
cycle, counting-down is made by one.
4) When the sewing machine finishes the specified
number of times, the sewing machine does not start
even if depressing the pedal.
5) Replace the bobbin with a new one, and press the
key.
6) Repeat the steps of procedure from the steps 3) to
5).
or key, and set the