Ravelli RBC 810 Manual De Uso Y Mantenimiento página 55

stickers).
Connect the power cord to the back of the stove and then to a wall socket. The I/O switch in the figure
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
Before turning on the stove, make sure you have fitted the grate on the support base and check that the door and the ash drawer
should be set to I to power the stove. If voltage is not supplied check the state of the fuse installed in
are properly close.
COMPLYING WITH THE SPECIFICATIONS BELOW
the box below the switch (4A fuse). During the periods of inactivity, we recommend you disconnect the
power cord of the stove.
How to load the pellets
Fuel supply consists in the insertion of pellets from the top of the stove, by opening the door. During pellet loading prevent the pel-
let bag from coming into contact with hot surfaces.
What to check befor turning on the stove
Make sure you have removed all parts that pose the risk of burns from the combustion chamber or glass (various instructions or
stickers).
Controls and use
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
Before turning on the stove, make sure you have fitted the grate on the support base and check that the door and the ash drawer
Description of the handheld set: COMPLYING WITH THE SPECIFICATIONS BELOW
are properly close.
The handheld set is shown in the picture below:
Description of the handheld set:
How to load the pellets
The handheld set is shown in the picture below:
Fuel supply consists in the insertion of pellets from the top of the stove, by opening the door. During pellet loading prevent the pel-
let bag from coming into contact with hot surfaces.
1
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
COMPLYING WITH THE SPECIFICATIONS BELOW
2
Description of the handheld set:
1
The handheld set is shown in the picture below:
2
3
3
1
2
3
The information below will allow you to become familiar with the product and achieve the best performance.
The information below will allow you to become familiar with the product and achieve the best performance.
How to insert the batteries in the handheld set:
How to insert the batteries in the handheld set:
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries (mini
(mini pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover
pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover as shown
as shown in figure B
in figure B
The information below will allow you to become familiar with the product and achieve the best performance.
How to insert the batteries in the handheld set:
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries
(mini pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover
as shown in figure B
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Handheld touch radio initialization
In order to operate correctly, the handheld set should be interfaced with the electronic board installed inside the stove. For this
reason, on display appears the following message:
Use and maintenance manual RBC 810 - RBC 812
4
5
6
Figure A
Figure A
Figure A
ITALIANO
DEUTSCH
ENGLISH
FRANCAIS
DANSK
NEDERLANDS
ESPANIOL
1
4 Increase button "UP" (selection key)
2 Decrease key "DOWN" (selection key)
5
3
ON/OFF or reset from "Sleep" mode key.
1
4 Increase button "UP" (selection key)
4 Display
2 Decrease key "DOWN" (selection key)
6
5 Key for accessing the MENU and back
5
3 ON/OFF or reset from "Sleep" mode key.
6
Confirmation key
4
Display
6
5 Key for accessing the MENU and back
In "Sleep" mode, the handheld set
6 Confirmation key
1 Increase button "UP" (selection key)
screen is obscured, keeping however
2 Decrease key "DOWN" (selection key)
In "Sleep" mode, the handheld set active the radio communication with
screen is obscured, keeping however
the stove to reduce battery con-
3 ON/OFF or reset from "Sleep" mode key.
active the radio communication with
sumption.
4
Display the stove to reduce battery con-
sumption.
5 Key for accessing the MENU and back
6
Confirmation key
In "Sleep" mode, the handheld set
screen is obscured, keeping however
active the radio communication with
the stove to reduce battery con-
sumption.
Rev.1 14/02/18
Page 55
EN
Figure B
Figure B
Figure B