Clean The Sensors And Charging Pins; Clean The Swivel Wheel; Clean The Mopping Module - EUFY RoboVac L70 Hybrid Manual Del Propietário

English

Clean the Sensors and Charging Pins

To maintain the best performance, clean the drop sensors and charging pins regularly.
• Dust off the sensors and charging contact pins using a cloth or cleaning brush.

Clean the Swivel Wheel

Hair or dust particles can easily get entangled in the swivel wheel. Be sure to clean the
swivel wheel periodically and as needed.
Wheel
Axle
1. Pull out the swivel wheel.
2. Clean any hair or debris wrapped around the wheel or entangled inside the wheel cavity.
34
3. Reinstall the wheel and push in until it clicks into place.
• Do not clean the swivel wheel with water.

Clean the mopping module

It is recommended to clean the mopping cloth after each use.
1. Remove the mopping cloth from the module.
2. Clean the cloth with water and air-dry it completely to avoid being mildewed or
producing unpleasant smell.
English
35