DAB PWM II 230 D 4.7 Instrucciones De Instalación Y Mantenimiento página 64

Minimum activation voltage [V]
Maximum deactivation voltage [V]
Maximum admissible voltage [V]
Current absorption at 12V [mA]
N.B. Inputs can be controlled with both polarities (positive or negative with respective return to earth)
2.3.4 Connection of the user outputs
The user outputs are available only in type M/T and T/T inverters.
The wiring diagram and the electrical characteristics of the outputs are shown below.
Type of contact
Max. admissible voltage [V]
Max. admissible current [A]
2.3.5 Connection of the remote sensor
Input characteristics for type M/T and T/T inverters
Table 6: Input specifications
User outputs wiring diagram
Type of Name of
inverter connector
M/T J13
T/T J6
Table 7: Output connection
Figure 3: Output connection
Output contact specifications
Table 8: Output contact specifications
Connection of the remote sensor
Type of inverter
M/T
T/T
M/M
Table 9: Connection of the remote pressure sensor
ENGLISH
DC inputs [V]
8
2
36
3,3
Pin
Out 1
1-2
3-4 Out 2
Out 1
1-2
3-4 Out 2
NO
250
5 -> resistive load
2,5 -> inductive load
Name of connector
J8
J10
J6
61
AC inputs 50-60 Hz [Vrms]
6
1,5
36
3,3
Output